PVGIS · SolarMapped
Solar potential in Denmark
These figures are the unweighted mean of the city locations listed below, not a national average. Two urban points do not represent an entire country, its roofs or its solar installations.
Explore on the solar map ↗Sampled-city benchmark
PV output is estimated electricity from 1 kWp of installed solar panels. Irradiation is sunlight energy received per square meter on the optimally tilted panel plane; it is not electricity.
For a 5 kWp system, multiply the electricity values by five. This simple scaling does not account for roof-specific shading or equipment constraints.
Range across these cities: 996–1,054kWh/kWp/year. Panel tilt and direction are location-specific; see each city.
Monthly solar irradiation and PV output
Highest-output month: May · 139.3kWh/kWp/month. Lowest-output month: December · 19.6kWh/kWp/month.
The chart and table use the mean of the listed cities for each month.
| Month | Estimated PV output (kWh/kWp/month) | Solar irradiation (kWh/m²/month) |
|---|---|---|
| January | 27.2 | 31.5 |
| February | 44.9 | 51.6 |
| March | 91.9 | 107.9 |
| April | 127.4 | 154.4 |
| May | 139.3 | 173.5 |
| June | 136.3 | 173 |
| July | 131.3 | 168.1 |
| August | 117.7 | 149 |
| September | 96.9 | 119.4 |
| October | 63.3 | 75.8 |
| November | 29.9 | 35.5 |
| December | 19.6 | 24 |
Compare cities
Data and methodology
PVGIS 5.3 (European Commission Joint Research Centre), crystalline silicon, fixed free-standing installation, 1 kWp, 14% system losses, equator-facing panels with optimized tilt and the terrain horizon. Long-term climate estimates are not a forecast or a roof survey. Nearby buildings, trees, roof constraints, snow and local conditions can change actual output.
- Copenhagen — Reference coordinates: 55.68, 12.57; Climate dataset / years: PVGIS-SARAH3 / 2005–2023; Data retrieved: .
- Aarhus — Reference coordinates: 56.16, 10.2; Climate dataset / years: PVGIS-SARAH3 / 2005–2023; Data retrieved: .
PVGIS methodology · Sources and assumptions (English) · Download the underlying data (JSON)