PVGIS · SolarMapped
Solar potential in Belgium
These figures are the unweighted mean of the city locations listed below, not a national average. Two urban points do not represent an entire country, its roofs or its solar installations.
Explore on the solar map ↗Sampled-city benchmark
PV output is estimated electricity from 1 kWp of installed solar panels. Irradiation is sunlight energy received per square meter on the optimally tilted panel plane; it is not electricity.
For a 5 kWp system, multiply the electricity values by five. This simple scaling does not account for roof-specific shading or equipment constraints.
Range across these cities: 1,041–1,045kWh/kWp/year. Panel tilt and direction are location-specific; see each city.
Monthly solar irradiation and PV output
Highest-output month: May · 125.8kWh/kWp/month. Lowest-output month: December · 33.2kWh/kWp/month.
The chart and table use the mean of the listed cities for each month.
| Month | Estimated PV output (kWh/kWp/month) | Solar irradiation (kWh/m²/month) |
|---|---|---|
| January | 39.2 | 45.7 |
| February | 55.2 | 64.8 |
| March | 92.7 | 111.5 |
| April | 119.1 | 147.6 |
| May | 125.8 | 158.3 |
| June | 123.2 | 158.2 |
| July | 122.5 | 159.2 |
| August | 112.9 | 145.1 |
| September | 100.7 | 126.7 |
| October | 73.3 | 89.5 |
| November | 45.1 | 53.5 |
| December | 33.2 | 39.3 |
Compare cities
Data and methodology
PVGIS 5.3 (European Commission Joint Research Centre), crystalline silicon, fixed free-standing installation, 1 kWp, 14% system losses, equator-facing panels with optimized tilt and the terrain horizon. Long-term climate estimates are not a forecast or a roof survey. Nearby buildings, trees, roof constraints, snow and local conditions can change actual output.
- Brussels — Reference coordinates: 50.85, 4.35; Climate dataset / years: PVGIS-SARAH3 / 2005–2023; Data retrieved: .
- Antwerp — Reference coordinates: 51.22, 4.4; Climate dataset / years: PVGIS-SARAH3 / 2005–2023; Data retrieved: .
PVGIS methodology · Sources and assumptions (English) · Download the underlying data (JSON)